Queen Anne

$15.50$35.00

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with 2 – 1½” stainless steel hex head screws.

When installing our cast fascia brackets on to a fascia board of composite material (Hardie board, cement board, fiber board, p.v.c., etc.), we advise using 2 ¾” stainless steel screws, mounted through the composite board into the 2x sub-fascia. When there is no 2x sub-fascia the bracket needs to be directly installed into the rafter tails.

See gutter fastening options below.

Description

The gutter nests inside the fascia bracket and can be secured down in the following ways:

Screw Installation
A black oxide stainless steel machine screw is placed through the front of the fascia bracket and gutter, then anchored on the inside with a flanged nut.

fb6

Tab Installation
A tab is secured to the fascia bracket with a black oxide stainless steel screw and t-nut. The tab is folded over the gutter to secure in place.

tab-installation

 

For an angled fascia application we offer wedges to be used with our fascia brackets. In a situation where a fascia installation is not applicable a fascia bracket with a roof bar can be used.

Additional information

Weight N/A
Size

, ,

Material

,