Showing all 13 results

Hidden Half Round Gutter Brackets with Rods

$1.50$9.00

Our 5″, 6″ and 8″ gutter brackets are available in two materials. The .063 aluminum brackets are compatible with aluminum and Galvalume gutter system. Our .060 stainless steel brackets are compatible with copper, aluminum and Galvalume gutter system.

They can be installed by two different methods. Whichever you choose, we recommend a general spacing of the brackets every 32″ on center. Extra strength can be achieved by placing the brackets closer together. This is a good idea for sections of the country dealing with heavy snow loads. Areas not dealing with heavy ice or snow can space the brackets further apart.

Gutter Brackets hung from the roof with a rod are called hanger units. Existing roofs, with a standard shingle installation, will have the rod placed over the first course of shingles and the flat part of the rod secured with 1½” screws under the second row of shingles. A new roof installation allows the rods to be placed under the roofing material, especially important for tile or slate roofs.

Stainless steel rods are shipped straight and need to be bent on-site. A rod bending tool can be rented to consistently bend the stainless steel rods to the same angle. The rod bender deposit is refundable upon the return of the tool. The bracket tab can be bent over the back hem of the gutter for a free floating installation.

For coastal locations we recommend using our marine stainless steel rods.

The aluminum rods are also shipped straight and can be bent by hand.

Hanger units are shipped with 1½” stainless steel screws and include the 2 stainless steel nuts used with the rods.

3″, 4″ & 5″ Round Flat Bottom Outlets, Copper & Aluminum

$3.00$17.00

These flat bottom round outlets are available in 3″, 4″ & 5″ sizes in copper and aluminum (colors are almond, black, clay, light bronze, low gloss white, musket brown, painted galvalume, royal brown and wicker). Some colors may take extra lead time to ship. See color chart below.

(Note: When ordering copper outlets, be sure to choose copper as the Color in the dropdown menu below.)

K-Style Hidden Gutter Brackets

$1.50$3.50

Our 5″ and 6″ K-Style gutter brackets are available in two materials. The .063 aluminum brackets are compatible with aluminum and Galvalume gutter system. Our .060 stainless steel brackets are compatible with copper, aluminum and Galvalume gutter system.

We recommend a general spacing of the brackets every 32″ on center. Extra strength can be achieved by placing the brackets closer together. This is a good idea for sections of the country dealing with heavy snow loads. Areas not dealing with heavy ice or snow can space the brackets further apart.

 

Plain Rib

$7.50$23.00

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

Plain cast bracket offer substantial substance in areas of snow and ice.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with 2 – 1½” stainless steel hex head screws.

When installing our cast fascia brackets on to a fascia board of composite material (Hardie board, cement board, fiber board, p.v.c., etc.), we advise using 2 ¾” stainless steel screws, mounted through the composite board into the 2x sub-fascia. When there is no 2x sub-fascia the bracket needs to be directly installed into the rafter tails.

See gutter fastening options below.

Our decorative accessories can be used to accent our 5″, 6″ & 8″ cast Plain fascia brackets. In addition, several of our accessories can adorn our funnel outlet and collector boxes. The cast accessory is installed with a black oxide screw through the front of the Plain fascia bracket and secured with a flange nut. All accessories for Plain fascia brackets are available in brass and chromated aluminum (ready to paint).

Antique Flat Open Curl

$11.00$25.00

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with 2 – 1½” stainless steel hex head screws.

When installing our cast fascia brackets on to a fascia board of composite material (Hardie board, cement board, fiber board, p.v.c., etc.), we advise using 2 ¾” stainless steel screws, mounted through the composite board into the 2x sub-fascia. When there is no 2x sub-fascia the bracket needs to be directly installed into the rafter tails.

See gutter fastening options below.

Closed Curl

$9.75$23.00

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with 2 – 1½” stainless steel hex head screws.

When installing our cast fascia brackets on to a fascia board of composite material (Hardie board, cement board, fiber board, p.v.c., etc.), we advise using 2 ¾” stainless steel screws, mounted through the composite board into the 2x sub-fascia. When there is no 2x sub-fascia the bracket needs to be directly installed into the rafter tails.

See gutter fastening options below.

Double Open Curl

$10.00$23.00

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with 2 – 1½” stainless steel hex head screws.

When installing our cast fascia brackets on to a fascia board of composite material (Hardie board, cement board, fiber board, p.v.c., etc.), we advise using 2 ¾” stainless steel screws, mounted through the composite board into the 2x sub-fascia. When there is no 2x sub-fascia the bracket needs to be directly installed into the rafter tails.

See gutter fastening options below.

Streamline

$6.50$17.50

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with 2 – 1½” stainless steel hex head screws.

When installing our cast fascia brackets on to a fascia board of composite material (Hardie board, cement board, fiber board, p.v.c., etc.), we advise using 2 ¾” stainless steel screws, mounted through the composite board into the 2x sub-fascia. When there is no 2x sub-fascia the bracket needs to be directly installed into the rafter tails.

See gutter fastening options below.

Open Curl

$8.75$25.00

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with 2 – 1½” stainless steel hex head screws.

When installing our cast fascia brackets on to a fascia board of composite material (Hardie board, cement board, fiber board, p.v.c., etc.), we advise using 2 ¾” stainless steel screws, mounted through the composite board into the 2x sub-fascia. When there is no 2x sub-fascia the bracket needs to be directly installed into the rafter tails.

See gutter fastening options below.

Splash

$8.50$21.00

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with 2 – 1½” stainless steel hex head screws.

When installing our cast fascia brackets on to a fascia board of composite material (Hardie board, cement board, fiber board, p.v.c., etc.), we advise using 2 ¾” stainless steel screws, mounted through the composite board into the 2x sub-fascia. When there is no 2x sub-fascia the bracket needs to be directly installed into the rafter tails.

See gutter fastening options below.

Queen Anne

$15.50$35.00

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with 2 – 1½” stainless steel hex head screws.

When installing our cast fascia brackets on to a fascia board of composite material (Hardie board, cement board, fiber board, p.v.c., etc.), we advise using 2 ¾” stainless steel screws, mounted through the composite board into the 2x sub-fascia. When there is no 2x sub-fascia the bracket needs to be directly installed into the rafter tails.

See gutter fastening options below.

Weathered Flat Plain

$9.50$20.00

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with 2 – 1½” stainless steel hex head screws.

When installing our cast fascia brackets on to a fascia board of composite material (Hardie board, cement board, fiber board, p.v.c., etc.), we advise using 2 ¾” stainless steel screws, mounted through the composite board into the 2x sub-fascia. When there is no 2x sub-fascia the bracket needs to be directly installed into the rafter tails.

See gutter fastening options below.

5″, 6″ & 8″ Stamped Half Round Fascia Brackets, Copper, Chromated Aluminum & Galvalume

$3.50$10.95

We recommend spacing our fascia brackets every 32″ on center. Our stamped fascia bracket requires the fascia board to be at least 4½” in height.

The gutter is secured by folding the back tab down and the front tab over the lip of the gutter.

Stamped fascia brackets are not as strong as our cast fascia brackets. If you are in an area that has heavy snow fall, we recommend cast fascia brackets for strength.

Copper available in 5″, 6″ and 8″ sizes.

Chromated aluminum available in 5″ and 6″ sizes only.

Galvalume is available in 5″ and 6″ sizes only.