Showing all 8 results
To achieve a projecting mount bracket choose one of the three sizes of passivated stainless steel bolts.
Available in copper and chromated aluminum (needs to be painted).
See our flush mount options here.
To achieve a projecting mount bracket choose one of the three sizes of passivated stainless steel bolts.
Each bracket consists of two pieces. Install as one unit.
Baked enamel finish to match gutter.
See our flush mount options here.
The cast stirrup downspout bracket will screw directly into a building and provide a 1″ standoff.
A stainless steel lag bolt has been cast directly into the stirrup for added strength. The brass stirrup includes a spring made of phosphorus bronze wire and the aluminum version includes a stainless steel spring.
All aluminum is chromated and needs to be painted.
The projecting mount downspout bracket is used when clearance is needed between your building and the downspout. The 3″ bracket will provide a 2¼” stand off and the 4″ bracket provides a 3″ stand off.
The bracket is mounted with 2-1½” stainless steel hex head screws. The center screw can be loosened, and the backplate rotated, to install the bracket in a vertical position.
The brass bracket includes a .054 phosphorus bronze spring which will patina with age. The aluminum bracket includes a .054 stainless steel spring.
All aluminum is chromated and needs to be painted.
The projecting mount downspout bracket is used when clearance is needed between your building and the downspout. The 3″ bracket will provide a 2¼” stand off and the 4″ bracket provides a 3″ stand off.
The bracket is mounted with 2-1½” stainless steel hex head screws. The center screw can be loosened, and the backplate rotated, to install the bracket in a vertical position.
The brass bracket includes a .054 phosphorus bronze spring which will patina with age. The aluminum bracket includes a .054 stainless steel spring.
All aluminum is chromated and needs to be painted.
The projecting mount downspout bracket is used when clearance is needed between your building and the downspout. The 3″ bracket will provide a 2¼” stand off and the 4″ bracket provides a 3″ stand off.
The bracket is mounted with 2-1½” stainless steel hex head screws. The center screw can be loosened, and the backplate rotated, to install the bracket in a vertical position.
The brass bracket includes a .054 phosphorus bronze spring which will patina with age. The aluminum bracket includes a .054 stainless steel spring.
All aluminum is chromated and needs to be painted.
The cast stirrup standoff bracket and base is used when clearance is needed between your building and the downspout. The stirrup is attached to the projecting base with a 1″ bolt and is then attached to the structure with 2-1½” stainless steel hex head screws.
Standoff Dimensions: 2″ for 3″ size; 2-3/8″ for 4″ size.
The brass bracket includes a .054 phosphorus bronze spring and the aluminum bracket includes a .054 stainless steel spring.
Photos show standoff bracket combined with 1-1/2″ diameter circular base (link); combined projection dimension for 3″ size is 3-1/8″, for 4″ size it’s 3-1/2″.
All aluminum is chromated and needs to be painted.
Downspout brackets are not only functional, but offer a beautiful accent to your downspouts.
The Cast Band Downspout Bracket consists of two pieces. The bracket is installed with a 1″ stainless steel bolt for flush mount installation and two 1″ screws with flange nuts to secure side screws.
To achieve a projecting mount installation, choose one of the three sizes of passivated stainless steel bolts listed here.
All aluminum is chromated and needs to be painted.
Available in 5″ only.
See flush mount option here.
