Showing all 5 results

Select options

5″, 6″ & 8″ Stamped Half Round Fascia Brackets, Copper, Chromated Aluminum & Galvalume

$3.50 – $10.95

We recommend spacing our fascia brackets every 32″ on center. Our stamped fascia bracket requires the fascia board to be at least 4½” in height.

The gutter is secured by folding the back tab down and the front tab over the lip of the gutter.

Stamped fascia brackets are not as strong as our cast fascia brackets. If you are in an area that has heavy snow fall, we recommend cast fascia brackets for strength.

Copper and chromated aluminum (needs to be painted) available in 5″, 6″ and 8″ sizes.

Galvalume is available in 5″ and 6″ sizes only.

Select options

5″ x .032 Gauge Stamped Half Round Fascia Brackets, Colored Aluminum

$3.50 – $4.20

We recommend spacing our fascia brackets every 32″ on center. Our stamped fascia bracket requires the fascia board to be at least 4½” in height.

The gutter is secured by folding the back tab down and the front tab over the lip of the gutter.

Stamped fascia brackets are not as strong as our cast fascia brackets. If you are in an area that has heavy snow fall, we recommend cast fascia brackets for strength.

See Aluminum Color Chart below.

Note: Bracket consists of two pieces. Do not separate during installation.

Select options

6″ & 8″ x .063 Gauge Stamped Half Round Fascia Brackets, Colored Aluminum

$3.95 – $6.95

We recommend spacing our fascia brackets every 32″ on center. Our stamped fascia bracket requires the fascia board to be at least 4½” in height.

The gutter is secured by folding the back tab down and the front tab over the lip of the gutter.

Stamped fascia brackets are not as strong as our cast fascia brackets. If you are in an area that has heavy snow fall, we recommend cast fascia brackets for strength.

Note: Only available in 6″ – Coppertone, grecian green and pearl grey brackets consist of two layers x .032. NEW rustic copper consists of two layers x .027 rustic copper/.032 brown. Do not separate during installation.

Select options

Wedges For 5″ & 6″ Stamped Fascia Brackets

$2.90 – $7.90

Wedges for our 5″ and 6″ Stamped Fascia Brackets are available in six angles – 7.5, 15, 22.5, 30, 37.5 and 45 degrees, in solid brass or chromated aluminum (ready for paint). The appropriate length screws will be shipped with order.

The first photo shows a wedge used with our Stamped Fascia Bracket. Second photo shows front and side views plus wedge dimensions. (Note: no photo of the 7.5 degree wedge.)

PRINT WEDGE ANGLE CHART: The third image is our handy wedge angle chart. Click here for a larger image (pdf) that you may print out. With the chart and a level, you’ll be able to determine the angle of your fascia and which wedges you’ll need.

Note: It may be beneficial to use an additional screw, to tighten the wedge against the board, when installing on an uneven fascia. The screw placement will be on the underside of wedge marked by an indentation.

Select options

Wedges For 8″ Stamped Fascia Brackets

$2.90 – $11.00

Wedges are available in six angles – 7.5, 15, 22.5, 30, 37.5 and 45 degree, in solid brass or chromated aluminum (ready for paint). The appropriate length screws will be shipped with order.

The first photo shows a wedge used with our Stamped Fascia Bracket. Second photo shows front and side views plus wedge dimensions. (Note: no photo of the 7.5 degree wedge.)

PRINT WEDGE ANGLE CHART: The third image is our handy wedge angle chart. Click here for a larger image (pdf) that you may print out. With the chart and a level, you’ll be able to determine the angle of your fascia and which wedges you’ll need.

Note: It may be beneficial to use an additional screw, to tighten the wedge against the board, when installing on an uneven fascia. The screw placement will be on the underside of wedge marked by an indentation.