Showing 1–16 of 107 results

Classic Bar Brackets

$5.50$11.25

Our Classic Bar Bracket is available in copper and chromated aluminum. Chromating is an industrial primer for aluminum and needs to be painted.

Please note: Our 6″ copper classic bar is now available in 1-1/4″ wide copper material for added strength and durability.

We recommend spacing our fascia brackets every 32″ on center. The bracket can be mounted to either the fascia board or rafter tails.

For use with an angled fascia: In areas without snow or ice, the back of the bracket can be bent in a vice to the desired angle of the fascia or rafter tail.

The fascia bracket is installed with 2 – #10 1½” hex head stainless steel screws. The gutter nests inside the bracket and is anchored by folding down both tabs.

The Classic Bar Bracket requires the fascia board to be a minimum of 3½” in height.

Scroll Bar Brackets

$7.00$18.00

Our Scroll Bar Bracket is available in copper and chromated aluminum. Chromating is an industrial primer for aluminum and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. The bracket can be mounted to either the fascia board or rafter tails.

For use with an angled fascia: In areas without snow or ice, the back of the bracket can be bent in a vice to the desired angle of the fascia or rafter tail.

The fascia bracket is installed with 2 – #10 1½” hex head stainless steel screws. The gutter nests inside the bracket and is anchored by folding down both tabs.

The Scroll Bar Bracket requires the fascia board to be a minimum of 3½” in height.

Roof Mount Classic Bar Brackets

$7.50$16.00

Our Roof Mount Classic Bar and Scroll Bar Brackets are available in copper and chromated aluminum. Chromating is an industrial primer for aluminum and needs to be painted.

Please note: Our 6″ aluminum roof mount classic bar bracket is now available in 1-1/4″ wide aluminum material for added strength and durability.

We recommend spacing our fascia brackets every 32″ on center. The bracket can be mounted to either the fascia board or rafter tails.  This bracket is not intended to be installed in areas with heavy snow or ice.

For a roof mount installation, the back of the bracket can be bent in a vice to the desired angle roof.

The fascia bracket is installed with 2 – #10 1½” hex head stainless steel screws. The gutter nests inside the bracket and is anchored by folding down both tabs.

Roof Mount Scroll Bar Brackets

$9.50$18.50

Our Roof Mount Classic Bar and Scroll Bar Brackets are available in copper and chromated aluminum. Chromating is an industrial primer for aluminum and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. The bracket can be mounted to either the fascia board or rafter tails.  This bracket is not intended to be installed in areas with heavy snow or ice.

For a roof mount installation, the back of the bracket can be bent in a vice to the desired angle roof.

The fascia bracket is installed with 2 – #10 1½” hex head stainless steel screws. The gutter nests inside the bracket and is anchored by folding down both tabs.

Hidden Half Round Gutter Brackets with Rods

$1.50$9.00

Our 5″, 6″ and 8″ gutter brackets are available in two materials. The .063 aluminum brackets are compatible with aluminum and Galvalume gutter system. Our .060 stainless steel brackets are compatible with copper, aluminum and Galvalume gutter system.

They can be installed by two different methods. Whichever you choose, we recommend a general spacing of the brackets every 32″ on center. Extra strength can be achieved by placing the brackets closer together. This is a good idea for sections of the country dealing with heavy snow loads. Areas not dealing with heavy ice or snow can space the brackets further apart.

Gutter Brackets hung from the roof with a rod are called hanger units. Existing roofs, with a standard shingle installation, will have the rod placed over the first course of shingles and the flat part of the rod secured with 1½” screws under the second row of shingles. A new roof installation allows the rods to be placed under the roofing material, especially important for tile or slate roofs.

Stainless steel rods are shipped straight and need to be bent on-site. A rod bending tool can be rented to consistently bend the stainless steel rods to the same angle. The rod bender deposit is refundable upon the return of the tool. The bracket tab can be bent over the back hem of the gutter for a free floating installation.

For coastal locations we recommend using our marine stainless steel rods.

The aluminum rods are also shipped straight and can be bent by hand.

Hanger units are shipped with 1½” stainless steel screws and include the 2 stainless steel nuts used with the rods.

3″, 4″ & 5″ Round Flat Bottom Outlets, Copper & Aluminum

$3.00$17.00

These flat bottom round outlets are available in 3″, 4″ & 5″ sizes in copper and aluminum (colors are almond, black, clay, light bronze, low gloss white, musket brown, painted galvalume, royal brown and wicker). Some colors may take extra lead time to ship. See color chart below.

(Note: When ordering copper outlets, be sure to choose copper as the Color in the dropdown menu below.)

K-Style Hidden Gutter Brackets

$1.50$3.50

Our 5″ and 6″ K-Style gutter brackets are available in two materials. The .063 aluminum brackets are compatible with aluminum and Galvalume gutter system. Our .060 stainless steel brackets are compatible with copper, aluminum and Galvalume gutter system.

We recommend a general spacing of the brackets every 32″ on center. Extra strength can be achieved by placing the brackets closer together. This is a good idea for sections of the country dealing with heavy snow loads. Areas not dealing with heavy ice or snow can space the brackets further apart.

 

6″ Plain Fascia Brackets – KWM Compatible

$9.00$17.00

Our KWM compatible cast brackets consist of a select group of Classic Gutter Systems, LLC top-selling brackets. The back hook of these brackets have been modified to fit gutter produced from a 6″ KWM gutter machine.

Please note that any of our cast brackets can be made as a KWM compatible bracket with enough lead time. A minimum order may be required.

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with three 1-1/2″ stainless steel hex head screws.

For an angled fascia application we offer 7.5, 15, 22.5, 30, 37.5 and 45 degree wedges to be used with our fascia brackets. In a situation where a fascia installation is not applicable, a fascia bracket and a roof bar can be used. See Additional Information below for wedge selection.

Wexford Leader Heads

$185.00$205.00

Leader Heads are placed at the top of the downspout and will accommodate 1-2 elbows.

Photo shows spun leader head in .050 chromated aluminum (needs to be painted); also available in 32 oz. copper.

Available in 3″ and 4″ sizes. NOTE: The 4″ Wexford Leader Head can also be used with 5″ downspout.

For the perfect finishing touch, add a Leader Head Roof (see below).

Harwell Leader Heads

$185.00$205.00

Leader Heads are placed at the top of the downspout and will accommodate 1-2 elbows.

Photo shows spun leader head in .050 chromated aluminum (needs to be painted); also available in 32 oz. copper.

Available in 3″ and 4″ sizes.

For the perfect finishing touch, add a Leader Head Roof (see below).

13″ Roofing Straps For Snow Guards

$3.50$5.00

The purpose of a snow guard is to help reduce snow/ice slide, not to stop it.

Snow guards without straps are applicable on metal roofs. Slate roofs require snow guards with straps.

Straps are 13″ long and available in copper and aluminum (low gloss white and royal brown).

Cisco Leader Heads

$185.00$205.00

Leader Heads are placed at the top of the downspout and will accommodate 1-2 elbows.

Photo shows spun leader head in .050 chromated aluminum (needs to be painted); also available in 32 oz. copper.

Available in 3″ and 4″ sizes.

For the perfect finishing touch, add a Leader Head Roof (see below).

5″ Open Curl K-Style Decorative Accessory

$6.90$9.90

Enhance your K-Style gutter installation with a unique cast decorative accessory.

Our 5″ K-Style cast accessory is purely decorative. When installed with a hidden gutter bracket, the cast decorative accessory will add an upscale finishing touch, and can be added to new or existing gutter.

Available in brass and chromated aluminum (ready for paint).

5″ Weathered Flat Plain K-Style Decorative Accessory

$6.90$9.90

Enhance your K-Style gutter installation with a unique cast decorative accessory.

Our 5″ K-Style cast accessory is purely decorative. When installed with a hidden gutter bracket, the cast decorative accessory will add an upscale finishing touch, and can be added to new or existing gutter.

Available in brass and chromated aluminum (ready for paint).