Showing 1–10 of 69 results

Classic Bar Brackets

$5.50$11.25

Our Classic Bar Bracket is available in copper and chromated aluminum. Chromating is an industrial primer for aluminum and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. The bracket can be mounted to either the fascia board or rafter tails.

For use with an angled fascia: In areas without snow or ice, the back of the bracket can be bent in a vice to the desired angle of the fascia or rafter tail.

The fascia bracket is installed with 3 – #10 1½” hex head stainless steel screws. The gutter nests inside the bracket and is anchored by folding down both tabs.

The Classic Bar Bracket requires the fascia board to be a minimum of 3½” in height.

Scroll Bar Brackets

$7.00$18.00

Our Scroll Bar Bracket is available in copper and chromated aluminum. Chromating is an industrial primer for aluminum and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. The bracket can be mounted to either the fascia board or rafter tails.

For use with an angled fascia: In areas without snow or ice, the back of the bracket can be bent in a vice to the desired angle of the fascia or rafter tail.

The fascia bracket is installed with 3 – #10 1½” hex head stainless steel screws. The gutter nests inside the bracket and is anchored by folding down both tabs.

The Scroll Bar Bracket requires the fascia board to be a minimum of 3½” in height.

Hidden Half Round Gutter Brackets with Rods

$1.50$9.25

Our 5″, 6″ and 8″ gutter brackets are available in two materials. The .063 aluminum brackets are compatible with aluminum and Galvalume gutter system. Our .060 stainless steel brackets are compatible with copper, aluminum and Galvalume gutter system.

They can be installed by two different methods. Whichever you choose, we recommend a general spacing of the brackets every 32″ on center. Extra strength can be achieved by placing the brackets closer together. This is a good idea for sections of the country dealing with heavy snow loads. Areas not dealing with heavy ice or snow can space the brackets further apart.

Gutter Brackets hung from the roof with a rod are called hanger units. Existing roofs, with a standard shingle installation, will have the rod placed over the first course of shingles and the flat part of the rod secured with 1½” screws under the second row of shingles. A new roof installation allows the rods to be placed under the roofing material, especially important for tile or slate roofs.

Stainless steel rods are shipped straight and need to be bent on-site. A rod bending tool can be rented to consistently bend the stainless steel rods to the same angle. The rod bender deposit is refundable upon the return of the tool. The bracket tab can be bent over the back hem of the gutter for a free floating installation.

For coastal locations we recommend using our marine stainless steel rods.

The aluminum rods are also shipped straight and can be bent by hand.

Hanger units are shipped with 1½” stainless steel screws and include the 2 stainless steel nuts used with the rods.

6″ Weathered Flat Plain Fascia Brackets for KWM

$11.50$20.00

Our KWM compatible cast brackets consist of a select group of Classic Gutter Systems, LLC top-selling brackets. The back hook of these brackets have been modified to fit gutter produced from a 6″ KWM gutter machine.

Please note that any of our cast brackets can be made as a KWM compatible bracket with enough lead time. A minimum order may be required.

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with three 1-1/2″ stainless steel hex head screws.

For an angled fascia application we offer 7.5, 15, 22.5, 30, 37.5 and 45 degree wedges to be used with our fascia brackets. In a situation where a fascia installation is not applicable, a fascia bracket and a roof bar can be used. See Additional Information below for wedge selection.

 

6″ Splash Fascia Brackets for KWM

$11.00$21.00

Our KWM compatible cast brackets consist of a select group of Classic Gutter Systems, LLC top-selling brackets. The back hook of these brackets have been modified to fit gutter produced from a 6″ KWM gutter machine.

Please note that any of our cast brackets can be made as a KWM compatible bracket with enough lead time. A minimum order may be required.

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with three 1-1/2″ stainless steel hex head screws.

For an angled fascia application we offer 7.5, 15, 22.5, 30, 37.5 and 45 degree wedges to be used with our fascia brackets. In a situation where a fascia installation is not applicable, a fascia bracket and a roof bar can be used. See Additional Information below for wedge selection.

6″ Streamline Fascia Brackets for KWM

$7.00$14.25

Our KWM compatible cast brackets consist of a select group of Classic Gutter Systems, LLC top-selling brackets. The back hook of these brackets have been modified to fit gutter produced from a 6″ KWM gutter machine.

Please note that any of our cast brackets can be made as a KWM compatible bracket with enough lead time. A minimum order may be required.

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with three 1-1/2″ stainless steel hex head screws.

For an angled fascia application we offer 7.5, 15, 22.5, 30, 37.5 and 45 degree wedges to be used with our fascia brackets. In a situation where a fascia installation is not applicable, a fascia bracket and a roof bar can be used. See Additional Information below for wedge selection.

6″ Open Curl Fascia Brackets for KWM

$10.00$20.00

Our KWM compatible cast brackets consist of a select group of Classic Gutter Systems, LLC top-selling brackets. The back hook of these brackets have been modified to fit gutter produced from a 6″ KWM gutter machine.

Please note that any of our cast brackets can be made as a KWM compatible bracket with enough lead time. A minimum order may be required.

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with three 1-1/2″ stainless steel hex head screws.

For an angled fascia application we offer 7.5, 15, 22.5, 30, 37.5 and 45 degree wedges to be used with our fascia brackets. In a situation where a fascia installation is not applicable, a fascia bracket and a roof bar can be used. See Additional Information below for wedge selection.

K-Style Hidden Gutter Brackets

$1.50$3.50

Our 5″ and 6″ K-Style gutter brackets are available in two materials. The .063 aluminum brackets are compatible with aluminum and Galvalume gutter system. Our .060 stainless steel brackets are compatible with copper, aluminum and Galvalume gutter system.

We recommend a general spacing of the brackets every 32″ on center. Extra strength can be achieved by placing the brackets closer together. This is a good idea for sections of the country dealing with heavy snow loads. Areas not dealing with heavy ice or snow can space the brackets further apart.

 

6″ Plain Fascia Brackets for KWM

$9.00$17.00

Our KWM compatible cast brackets consist of a select group of Classic Gutter Systems, LLC top-selling brackets. The back hook of these brackets have been modified to fit gutter produced from a 6″ KWM gutter machine.

Please note that any of our cast brackets can be made as a KWM compatible bracket with enough lead time. A minimum order may be required.

Fascia brackets are available in solid brass or chromated aluminum. Our cast brass items are 88% copper, medium in color and will oxidize over time. Chromating is an industrial primer for aluminum castings and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. Fascia brackets can be mounted the fascia board with three 1-1/2″ stainless steel hex head screws.

For an angled fascia application we offer 7.5, 15, 22.5, 30, 37.5 and 45 degree wedges to be used with our fascia brackets. In a situation where a fascia installation is not applicable, a fascia bracket and a roof bar can be used. See Additional Information below for wedge selection.