Wedges For 5″ & 6″ Stamped Fascia Brackets

$2.90$7.90

Wedges for our 5″ and 6″ Stamped Fascia Brackets are available in six angles – 7.5, 15, 22.5, 30, 37.5 and 45 degrees, in solid brass or chromated aluminum (ready for paint). The appropriate length screws will be shipped with order.

The first photo shows a wedge used with our Stamped Fascia Bracket. Second photo shows front and side views plus wedge dimensions. (Note: no photo of the 7.5 degree wedge.)

PRINT WEDGE ANGLE CHART: The third image is our handy wedge angle chart. Click here for a larger image (pdf) that you may print out. With the chart and a level, you’ll be able to determine the angle of your fascia and which wedges you’ll need.

Note: It may be beneficial to use an additional screw, to tighten the wedge against the board, when installing on an uneven fascia. The screw placement will be on the underside of wedge marked by an indentation.

Clear

Additional information

Weight 0.425 lbs
Dimensions 3.5 × 0.69 in
Material

,

Degree

, , , , ,