Showing all 8 results

Copper Strip Miters For K-Style Gutter

$13.00$18.00

We manufacture strip miters which duplicate the configuration of a corner. Strip miters are installed on the outside of the gutter and are approximately 3″ wide.

Installation:
90° corner-cut each gutter length at 45° angles
45° corner-cut each gutter length at 22½° angles

Your cuts do not need to be perfect, the strip miter allows for tolerance while maintaining a custom corner. An additional 12″ needs to be added to each piece of gutter used on an outside mitered corner. Inside miters do not require extra gutter. The miters are installed with 3/8″ stainless steel screws and soldered on the inside.

Aluminum Rain Deflectors

$41.00

Rain deflectors are a decorative way to help disperse large amounts of water channeling down a roof line.

Deflectors are attached to the lip of the gutter with ¾” stainless steel screws.

These chromated aluminum rain deflectors (they will need painting) are constructed from two sections, 5″ high and 6″ wide.

Galvalume Strip Miters For Half Round Gutter

$5.00$8.00

We manufacture strip miters which duplicate the configuration of a corner. Strip miters are installed on the outside of the gutter and are approximately 3″ wide.

Installation:
90° corner-cut each gutter length at 45° angles
45° corner-cut each gutter length at 22½° angles

Your cuts do not need to be perfect, the strip miter allows for tolerance while maintaining a custom corner. An additional 12″ needs to be added to each piece of gutter used on an outside mitered corner. Inside miters do not require extra gutter. The miters are installed with 3/8″ stainless steel screws and soldered or sealed with sealant.

We do not sell box miters. We believe the use of a strip miter eliminates extra seams while maintaining the strength of your corner.

Brass Rain Deflectors

$69.00

Rain deflectors are a decorative way to help disperse large amounts of water channeling down a roof line.

Attached to the lip of the gutter with ¾” stainless steel screws.

Solid cast brass, constructed from two sections 5″ high and 6″ wide.

8″ Aluminum Strip Miters For Half Round Gutter

$6.00$7.20

We manufacture strip miters which duplicate the configuration of a corner. Strip miters are installed on the outside of the gutter and are approximately 3″ wide.

Installation:
90° corner-cut each gutter length at 45° angles
45° corner-cut each gutter length at 22½° angles

Your cuts do not need to be perfect, the strip miter allows for tolerance while maintaining a custom corner. An additional 12″ needs to be added to each piece of gutter used on an outside mitered corner. Inside miters do not require extra gutter. The miters are installed with 3/8″ stainless steel screws and sealed on the inside with sealant.

See Aluminum Color Chart below.

6″ Aluminum Strip Miters For Half Round Gutter

$5.50$6.60

We manufacture strip miters which duplicate the configuration of a corner. Strip miters are installed on the outside of the gutter and are approximately 3″ wide.

Installation:
90° corner-cut each gutter length at 45° angles
45° corner-cut each gutter length at 22½° angles

Your cuts do not need to be perfect, the strip miter allows for tolerance while maintaining a custom corner. An additional 12″ needs to be added to each piece of gutter used on an outside mitered corner. Inside miters do not require extra gutter. The miters are installed with 3/8″ stainless steel screws and sealed on the inside with sealant.

See Aluminum Color Chart below.

5″ Aluminum Strip Miters For Half Round Gutter

$5.00$6.00

We manufacture strip miters which duplicate the configuration of a corner. Strip miters are installed on the outside of the gutter and are approximately 3″ wide.

Installation:
90° corner-cut each gutter length at 45° angles
45° corner-cut each gutter length at 22½° angles

Your cuts do not need to be perfect, the strip miter allows for tolerance while maintaining a custom corner. An additional 12″ needs to be added to each piece of gutter used on an outside mitered corner. Inside miters do not require extra gutter. The miters are installed with 3/8″ stainless steel screws and sealed on the inside with sealant.

See Aluminum Color Chart below.

Copper Strip Miters For Half Round Gutter

$9.00$12.00

We manufacture strip miters which duplicate the configuration of a corner. Strip miters are installed on the outside of the gutter and are approximately 3″ wide.

Installation:
90° corner-cut each gutter length at 45° angles
45° corner-cut each gutter length at 22½° angles

Your cuts do not need to be perfect, the strip miter allows for tolerance while maintaining a custom corner. An additional 12″ needs to be added to each piece of gutter used on an outside mitered corner. Inside miters do not require extra gutter. The miters are installed with 3/8″ stainless steel screws and soldered or sealed on the inside.