Corrugated

Showing 1–16 of 19 results

4″ x .024 Aluminum Corrugated Round Downspout, Select Colors

We recommend corrugated downspout for areas of the country that experience snow and ice. Corrugation allows for expansion in the event of ice build-up in the downspout, and also helps hide nicks and dents from daily exposure.

Note: Select Color corrugated aluminum downspout, shown here in Grecian Green, is priced the same per 10-foot length as our Standard Colors (see Aluminum Color Chart below).

Due to the machine setup required to produce Select Color Corrugated Downspout and Elbows, there is a $100.00 up charge (one up charge per color, per order).

Downspout sections are available in 10′ pre-cut lengths. Each box holds 60 ft. of 4″ downspout. Don’t forget to order additional downspout for elbow offsets and future repairs.

You will need to reduce the size of the opening on the elbows and downspout.

Downspout orders LONGER than 6′ will be shipped via truck and subject to a MINIMUM shipping fee of $150.00

One to three pieces of downspout can be sent UPS. The 10′ downspout will be cut into 6′ & 4′ sections. UPS charges will run in the $100 range. Please indicate in the “Order Notes” area at checkout whether you want a UPS or freight quote.

To order Corrugated Select Color Downspout, please call us at 269.665.2700.

4″ x .024 Aluminum Corrugated Round Elbows, Select Colors

The average installation requires two elbows at the top and one at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary. The offset is the measurement of two connected elbows; 40 degree elbows have a 3″–9″ offset and 72 degree elbows have a 9″ offset.

The degree of elbow you use is determined by the overhang of your structure. To determine the overhang, measure the distance between the wall of your building and the back of the outlet. An overhang of 9″ will require 2- 72 degree elbows. If your overhang is greater than 9″ you’ll need to insert a piece of downspout between the elbows.

An overhang of less than 9″ will require (2) 40 degree elbows. This elbow combination also works when making a transition around a ledge or other protrusions.

You’ll need to reduce the size of the opening on the elbows and downspout when using either corrugated or smooth options. (see Product Description below left and our Elbow & Downspout Crimper Tool.)

Note: These Select Color corrugated aluminum elbows, shown here in Grecian Green, are priced the same as our Standard Colors (see Aluminum Color Chart below), but due to the machine setup required to produce them, there is a $100.00 up charge (one up charge per color, per order, covers elbows and downspout in the same color).

To order Corrugated Select Color Elbows, please call us at 269.665.2700.

3″ x .019 Aluminum Corrugated Elbows, Select Colors

The average installation requires two elbows at the top and one at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary. The offset is the measurement of two connected elbows; 40 degree elbows have a 2″–7″ offset and 72 degree elbows have an 8″ offset.

The degree of elbow you use is determined by the overhang of your structure. To determine the overhang, measure the distance between the wall of your building and the back of the outlet. An overhang of 9″ will require 2- 72 degree elbows. If your overhang is greater than 9″ you’ll need to insert a piece of downspout between the elbows.

An overhang of less than 9″ will require (2) 40 degree elbows. This elbow combination also works when making a transition around a ledge or other protrusions.

You’ll need to reduce the size of the opening on the elbows and downspout when using either corrugated or smooth options. (see Product Description below left and our Elbow & Downspout Crimper Tool.)

Note: These Select Color corrugated aluminum elbows, shown here in Grecian Green, are priced the same as our Standard Colors (see Aluminum Color Chart below), but due to the machine setup required to produce them, there is a $100.00 up charge (one up charge per color, per order, covers elbows and downspout in the same color).

To order Corrugated Select Color Elbows, please call us at 269.665.2700.

5″ x 16, 18 & 20 oz. Copper Smooth Round & Corrugated Elbows

$27.50$29.50

Smooth elbows will have one end expanded for ease of installation

The average downspout installation requires 2 elbows at the top and 1 at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary.

The offset is the measurement of 2 connected elbows. The 40 degree elbows have an offset from 5″–10″. 72 degreee elbow offset is 11″. For offsets greater than 11″ extra downspout will be needed.

An overhang of less than 5″ will require 2-40 degree elbows. This elbow combination also works when making a transition around a ledge of other protrusion.

You will need to reduce the size of the opening on the elbows and downspout when installing the downspout system. (See Installation Tips below.)

Note: 16 oz. smooth elbows will have folds in the bend; 18 oz. welded seam smooth elbows are completely smooth.

3″ x .019 Aluminum Corrugated Round Downspout, Select Colors

We recommend corrugated downspout for areas of the country that experience snow and ice. Corrugation allows for expansion in the event of ice build-up in the downspout, and also helps hide nicks and dents from daily exposure.

Note: Select Color corrugated aluminum downspout, shown here in Grecian Green, is priced the same per 10-foot length as our Standard Colors (see Aluminum Color Chart below).

Due to the machine setup required to produce Select Color Corrugated Downspout and Elbows, there is a $100.00 up charge (one up charge per color, per order).

Downspout sections are available in 10′ pre-cut lengths. Each box holds 80 ft. of 3″ downspout. Don’t forget to order additional downspout for elbow offsets and future repairs.

Downspout orders LONGER than 6′ will be shipped via truck and subject to a MINIMUM shipping fee of $150.00

One to three pieces of downspout can be sent UPS. The 10′ downspout will be cut into 6′ & 4′ sections. UPS charges will run in the $100 range. Please indicate in the “Order Notes” area at checkout whether you want a UPS or freight quote.

To order Corrugated Select Color Downspout, please call us at 269.665.2700.

4″ x 16 oz Copper Smooth Round & Corrugated Downspout

$98.50

Downspout sections are available in 10′ pre-cut lengths.

Smooth downspout will have one end expanded for ease of installation.  We recommend corrugated downspout for areas of the country that experience snow and ice. Corrugation allows for expansion in the event of ice build-up in the downspout. Corrugation also helps hide nicks and dents from daily exposure.

Don’t forget to order additional downspout for elbow offsets and future repairs.

Price shown is per 10 foot length. Each box holds 60 ft. of 4″ downspout.

Downspout orders LONGER than 6′ will be shipped via truck and subject to a MINIMUM shipping fee of $150.00

One to three pieces of downspout can be sent UPS. The 10′ downspout will be cut into 6′ & 4′ sections. UPS charges will run in the $100 range. Please indicate in the “Order Notes” area at checkout whether you want a UPS or freight quote.

Each gutter and downspout order is unique at Classic Gutter Systems. Once you’ve placed your order on this website, you’ll be contacted within 48 hours with a complete, detailed quote including packaging and shipping costs.

 

5″ x 24 Gauge Galvalume Smooth Round & Corrugated Downspout

$41.00

Downspout sections are available in 10′ pre-cut lengths. We recommend corrugated downspout for areas of the country that experience snow and ice. Corrugation allows for expansion in the event of ice build-up in the downspout. Corrugation also helps hide nicks and dents from daily exposure.

Smooth downspout has one end expanded for ease of installation. We take great care in the packaging of our downspout; however, flawless sections of smooth downspout cannot be guaranteed due to potential improper handling by the freight carriers.

Price listed is per 10 foot length. Each box holds 40 ft. of 5″ downspout.

Don’t forget to order additional downspout for elbow offsets and future repairs.

Downspout orders LONGER than 6′ will be shipped via truck and subject to a MINIMUM shipping fee of $150.00

One to three pieces of downspout can be sent UPS. The 10′ downspout will be cut into 6′ & 4′ sections. UPS charges will run in the $100 range. Please indicate in the “Order Notes” area at checkout whether you want a UPS or freight quote.

Each gutter and downspout order is unique at Classic Gutter Systems. Once you have placed your order on this website, you’ll be contacted within 48 hours with a complete, detailed quote including packaging and shipping costs.

4″ x 26 Gauge Galvalume Smooth Round & Corrugated Downspout

$19.50

Downspout sections are available in 10′ pre-cut lengths. We recommend corrugated downspout for areas of the country that experience snow and ice. Corrugation allows for expansion in the event of ice build-up in the downspout. Corrugation also helps hide nicks and dents from daily exposure.

Smooth downspout will have one end expanded for ease of installation.  Smooth downspout is recommended mainly for southern climates. We take great care in the packaging of our downspout; however, flawless sections of smooth downspout cannot be guaranteed due to potential improper handling by the freight carriers.

Don’t forget to order additional downspout for elbow offsets and future repairs.

Price shown is per 10 foot length. Each box holds 60 ft. of 4″ downspout.

Downspout orders LONGER than 6′ will be shipped via truck and subject to a MINIMUM shipping fee of $150.00

One to three pieces of downspout can be sent UPS. The 10′ downspout will be cut into 6′ & 4′ sections. UPS charges will run in the $100 range. Please indicate in the “Order Notes” area at checkout whether you want a UPS or freight quote.

Each gutter and downspout order is unique at Classic Gutter Systems. Once you’ve placed your order on this website, you’ll be contacted within 48 hours with a complete, detailed quote including packaging and shipping costs.

3″ x 26 Gauge Galvalume Smooth Round & Corrugated Downspout

$16.50

Downspout sections are available in 10′ pre-cut lengths. We recommend corrugated downspout for areas of the country that experience snow and ice. Corrugation allows for expansion in the event of ice build-up in the downspout. Corrugation also helps hide nicks and dents from daily exposure.

Smooth downspout is recommended mainly for southern climates. We take great care in the packaging of our downspout; however, flawless sections of smooth downspout cannot be guaranteed due to potential improper handling by the freight carriers.

Note: Smooth downspout has one end expanded.

Don’t forget to order additional downspout for elbow offsets and future repairs.

Price shown is per 10 foot length. Each box holds 80 ft. of 3″ downspout.

Downspout orders LONGER than 6′ will be shipped via truck and subject to a MINIMUM shipping fee of $150.00

One to three pieces of downspout can be sent UPS. The 10′ downspout will be cut into 6′ & 4′ sections. UPS charges will run in the $100 range. Please indicate in the “Order Notes” area at checkout whether you want a UPS or freight quote.

Each gutter and downspout order is unique at Classic Gutter Systems. Once you’ve placed your order on this website, you’ll be contacted within 48 hours with a complete, detailed quote including packaging and shipping costs.

5″ x 16 or 20 oz. Copper Smooth Round & Corrugated Downspout

$175.50$197.50

Downspout sections are available in 10′ pre-cut lengths. We recommend corrugated downspout for areas of the country that experience snow and ice. Corrugation allows for expansion in the event of ice build-up in the downspout. Corrugation also helps hide nicks and dents from daily exposure.

Smooth downspout has one end expanded for ease of installation. We take great care in the packaging of our downspout; however, flawless sections of smooth downspout cannot be guaranteed due to potential improper handling by the freight carriers.

Available in both 16 oz. and 20 oz. weights. Price listed is per 10 foot length. Each box holds 40 ft. of 5″ downspout.

Don’t forget to order additional downspout for elbow offsets and future repairs.

Downspout orders LONGER than 6′ will be shipped via truck and subject to a MINIMUM shipping fee of $150.00

One to three pieces of downspout can be sent UPS. The 10′ downspout will be cut into 6′ & 4′ sections. UPS charges will run in the $100 range. Please indicate in the “Order Notes” area at checkout whether you want a UPS or freight quote.

Each gutter and downspout order is unique at Classic Gutter Systems. Once you have placed your order on this website, you’ll be contacted within 48 hours with a complete, detailed quote including packaging and shipping costs.

3″ x 16 oz Copper Smooth Round & Corrugated Downspout

$76.50

Downspout sections are available in 10′ pre-cut lengths. We recommend corrugated downspout for areas of the country that experience snow and ice. Corrugation allows for expansion in the event of ice build-up in the downspout. Corrugation also helps hide nicks and dents from daily exposure.

Smooth downspout will have one end expanded for ease of installation.  Smooth downspout is recommended mainly for southern climates. We take great care in the packaging of our downspout; however, flawless sections of smooth downspout cannot be guaranteed due to potential improper handling by the freight carriers.

Note: Smooth downspout has one end expanded.

Don’t forget to order additional downspout for elbow offsets and future repairs.

Price shown is per 10 ft. length. Each box holds 80 ft. of 3″ downspout.

Downspout orders LONGER than 6′ will be shipped via truck and subject to a MINIMUM shipping fee of $150.00

One to three pieces of downspout can be sent UPS. The 10′ downspout will be cut into 6′ & 4′ sections. UPS charges will run in the $100 range. Please indicate in the “Order Notes” area at checkout whether you want a UPS or freight quote.

Each gutter and downspout order is unique at Classic Gutter Systems. Once you’ve placed your order on this website, you’ll be contacted within 48 hours with a complete, detailed quote including packaging and shipping costs.

5″ x .032 Aluminum Smooth Round & Corrugated Elbows

$8.95

Our Aluminum Elbows are available in several Standard Colors (smooth and corrugated styles). See Color Chart below.  Note: 5″ almond elbows are available in smooth only.

Smooth elbows will have one end expanded for ease of installation.  The average installation requires two elbows at the top and one at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary.

The offset is the measurement of 2 connected elbows. 40 degree elbows have a 5″–10″ offset; 72 degree elbows have an 11″ offset. For offsets greater than 11″ extra downspout will be needed.

An overhang of less than 5″ will require 2-40 degree elbows. This elbow combination also works when making a transition around a ledge of other protrusion.

You’ll need to reduce the size of the opening on the elbows and downspout when using either corrugated or smooth options. (see Product Description below left and our Elbow & Downspout Crimper Tool.)

Note: Smooth elbows will have folds in the bend.

3″ x 26 gauge Galvalume Smooth Round & Corrugated Elbows

$2.75

Smooth elbows will have one end expanded for ease of installation.  

The average installation requires two elbows at the top and one at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary.

  • The offset is the measurement of two connected elbows. 40 degree elbows have a 2″–7″ offset; 72 degree elbows have an 8″ offset.
  • The degree of elbow you use is determined by the overhang of your structure.

To determine the overhang, measure the distance between the wall of your building and the back of the outlet. An overhang of 9″ will require 2- 72 degree elbows. If your overhang is greater than 9″, you will need to insert a piece of downspout between the elbows.

An overhang of less than 9″ will require 2- 40 degree elbows. This elbow combination also works when making a transition around a ledge or other protrusion.

Note: 40 degree elbows have a 2″–7″ offset; 72 degree elbows have an 8″ offset.

You will need to reduce the size of the opening on the elbows and downspout when using either corrugated or smooth options. (see Installation Tips below)

3″ x .019 Aluminum Smooth Round & Corrugated Elbows

$2.75$3.30

Smooth elbows will have one end expanded for ease of installation.  

Our Aluminum Elbows are available in several Standard Colors (smooth and corrugated styles) and Select Colors in smooth style. See Color Chart below. We can also produce Select Color corrugated elbows for a $100.00 up charge per order.

The average installation requires two elbows at the top and one at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary. The offset is the measurement of two connected elbows; 40 degree elbows have a 2″–7″ offset and 72 degree elbows have an 8″ offset.

The degree of elbow you use is determined by the overhang of your structure. To determine the overhang, measure the distance between the wall of your building and the back of the outlet. An overhang of 9″ will require 2- 72 degree elbows. If your overhang is greater than 9″ you’ll need to insert a piece of downspout between the elbows.

An overhang of less than 9″ will require (2) 40 degree elbows. This elbow combination also works when making a transition around a ledge or other protrusions.

You’ll need to reduce the size of the opening on the elbows and downspout when using either corrugated or smooth options. (see Product Description below left and our Elbow & Downspout Crimper Tool.)

Note: Smooth elbows will have folds in the bend. $100.00 up charge to make select color corrugated downspout and elbows. (Up charge per color)

5″ x 24 Gauge Galvalume Smooth Round & Corrugated Elbows

$8.95

Smooth elbows will have one end expanded for ease of installation.  

The average downspout installation requires 2 elbows at the top and 1 at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary.

The offset is the measurement of 2 connected elbows. The 40 degree elbows have an offset from 5″–10″. 72 degreee elbow offset is 11″. For offsets greater than 11″ extra downspout will be needed.

An overhang of less than 5″ will require 2-40 degree elbow. This elbow combination also works when making a transition around a ledge of other protrusion.

You will need to reduce the size of the opening on the elbows and downspout when installing the downspout system. See Installation Tips under Product Description below and our Elbow & Downspout Crimper Tool.)

3″ x .019 Aluminum Smooth Round & Corrugated Downspout

$16.50$19.80

Downspout sections are available in 10′ pre-cut lengths. We recommend corrugated downspout for areas of the country that experience snow and ice. Corrugation allows for expansion in the event of ice build-up in the downspout. Corrugation also helps hide nicks and dents from daily exposure.

Smooth downspout is recommended mainly for southern climates. We take great care in the packaging of our downspout; however, flawless sections of smooth downspout cannot be guaranteed due to potential improper handling by the freight carriers.

All of our 3″ aluminum smooth downspout has one expanded end, allowing for a a far superior installation to the traditional crimped joint. We are proud to be the only manufacturer to supply 13 colors of 3″ aluminum downspout with an expanded end.

Price shown is per 10 foot length. Each box holds 80 ft. of 3″ downspout.

Our Aluminum Downspout is available in Smooth and Corrugated styles in these four Standard Colors: high gloss white, low gloss white, dark bronze and royal brown (see Aluminum Color Chart below). Note: We can make Select Color Corrugated Downspout and Elbows for a $100.00 up charge (one charge per color, per order).

Don’t forget to order additional downspout for elbow offsets and future repairs.

Downspout orders LONGER than 6′ will be shipped via truck and subject to a MINIMUM shipping fee of $150.00

One to three pieces of downspout can be sent UPS. The 10′ downspout will be cut into 6′ & 4′ sections. UPS charges will run in the $100 range. Please indicate in the “Order Notes” area at checkout whether you want a UPS or freight quote.

Each gutter and downspout order is unique at Classic Gutter Systems. Once you’ve placed your order on this website, you’ll be contacted within 48 hours with a complete, detailed quote including packaging and shipping costs.