5″ x .032 Aluminum Smooth Round & Corrugated Elbows


Our Aluminum Elbows are available in several Standard Colors (smooth and corrugated styles). See Color Chart below.  Note: 5″ almond elbows are available in smooth only.

Smooth elbows will have one end expanded for ease of installation.  The average installation requires two elbows at the top and one at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary.

The offset is the measurement of 2 connected elbows. 40 degree elbows have a 5″–10″ offset; 72 degree elbows have an 11″ offset. For offsets greater than 11″ extra downspout will be needed.

An overhang of less than 5″ will require 2-40 degree elbows. This elbow combination also works when making a transition around a ledge of other protrusion.

You’ll need to reduce the size of the opening on the elbows and downspout when using either corrugated or smooth options. (see Product Description below left and our Elbow & Downspout Crimper Tool.)

Note: Smooth elbows will have folds in the bend.

Categories: , SKU: N/A Tag:




Installation tips:
A downspout & elbow crimper tool will reduce the size of the opening by crimping the edges of the smooth downspout and elbows.

Needle nose pliers may be used to reduce the size of the opening when connecting corrugated elbows and downspout. Take hold of the inside corrugation with the pliers and turn so the corrugation becomes tighter.


Additional information

Weight N/A

, ,