Showing 1–16 of 17 results

Classic Bar Brackets

$5.50$11.25

Our Classic Bar Bracket is available in copper and chromated aluminum. Chromating is an industrial primer for aluminum and needs to be painted.

Please note: Our 6″ copper classic bar is now available in 1-1/4″ wide copper material for added strength and durability.

We recommend spacing our fascia brackets every 32″ on center. The bracket can be mounted to either the fascia board or rafter tails.

For use with an angled fascia: In areas without snow or ice, the back of the bracket can be bent in a vice to the desired angle of the fascia or rafter tail.

The fascia bracket is installed with 2 – #10 1½” hex head stainless steel screws. The gutter nests inside the bracket and is anchored by folding down both tabs.

The Classic Bar Bracket requires the fascia board to be a minimum of 3½” in height.

Scroll Bar Brackets

$7.00$18.00

Our Scroll Bar Bracket is available in copper and chromated aluminum. Chromating is an industrial primer for aluminum and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. The bracket can be mounted to either the fascia board or rafter tails.

For use with an angled fascia: In areas without snow or ice, the back of the bracket can be bent in a vice to the desired angle of the fascia or rafter tail.

The fascia bracket is installed with 2 – #10 1½” hex head stainless steel screws. The gutter nests inside the bracket and is anchored by folding down both tabs.

The Scroll Bar Bracket requires the fascia board to be a minimum of 3½” in height.

Roof Mount Classic Bar Brackets

$7.50$16.00

Our Roof Mount Classic Bar and Scroll Bar Brackets are available in copper and chromated aluminum. Chromating is an industrial primer for aluminum and needs to be painted.

Please note: Our 6″ aluminum roof mount classic bar bracket is now available in 1-1/4″ wide aluminum material for added strength and durability.

We recommend spacing our fascia brackets every 32″ on center. The bracket can be mounted to either the fascia board or rafter tails.  This bracket is not intended to be installed in areas with heavy snow or ice.

For a roof mount installation, the back of the bracket can be bent in a vice to the desired angle roof.

The fascia bracket is installed with 2 – #10 1½” hex head stainless steel screws. The gutter nests inside the bracket and is anchored by folding down both tabs.

Roof Mount Scroll Bar Brackets

$9.50$18.50

Our Roof Mount Classic Bar and Scroll Bar Brackets are available in copper and chromated aluminum. Chromating is an industrial primer for aluminum and needs to be painted.

We recommend spacing our fascia brackets every 32″ on center. The bracket can be mounted to either the fascia board or rafter tails.  This bracket is not intended to be installed in areas with heavy snow or ice.

For a roof mount installation, the back of the bracket can be bent in a vice to the desired angle roof.

The fascia bracket is installed with 2 – #10 1½” hex head stainless steel screws. The gutter nests inside the bracket and is anchored by folding down both tabs.

3″, 4″ & 5″ Round Flat Bottom Outlets, Copper & Aluminum

$3.00$17.00

These flat bottom round outlets are available in 3″, 4″ & 5″ sizes in copper and aluminum (colors are almond, black, clay, light bronze, low gloss white, musket brown, painted galvalume, royal brown and wicker). Some colors may take extra lead time to ship. See color chart below.

(Note: When ordering copper outlets, be sure to choose copper as the Color in the dropdown menu below.)

Grisham Leader Heads

$235.00$275.00

Leader heads are placed at the top of the downspout and will accommodate 1-2 elbows.

Grisham Leader Heads are available in 3″ & 4″ –  and in copper, low gloss white and dark bronze aluminum.

Add a decorative touch with a unique fascia bracket accessory (second photo shows our Eagle Accessory installed) or one of our beautiful medallions.

Measurements are as follows: 11″ high (without outlet), 12.25″ wide and 8.75″ front to back.

Wexford Leader Heads

$185.00$205.00

Leader Heads are placed at the top of the downspout and will accommodate 1-2 elbows.

Photo shows spun leader head in .050 chromated aluminum (needs to be painted); also available in 32 oz. copper.

Available in 3″ and 4″ sizes. NOTE: The 4″ Wexford Leader Head can also be used with 5″ downspout.

For the perfect finishing touch, add a Leader Head Roof (see below).

Harwell Leader Heads

$185.00$205.00

Leader Heads are placed at the top of the downspout and will accommodate 1-2 elbows.

Photo shows spun leader head in .050 chromated aluminum (needs to be painted); also available in 32 oz. copper.

Available in 3″ and 4″ sizes.

For the perfect finishing touch, add a Leader Head Roof (see below).

13″ Roofing Straps For Snow Guards

$3.50$5.00

The purpose of a snow guard is to help reduce snow/ice slide, not to stop it.

Snow guards without straps are applicable on metal roofs. Slate roofs require snow guards with straps.

Straps are 13″ long and available in copper and aluminum (low gloss white and royal brown).

Cisco Leader Heads

$185.00$205.00

Leader Heads are placed at the top of the downspout and will accommodate 1-2 elbows.

Photo shows spun leader head in .050 chromated aluminum (needs to be painted); also available in 32 oz. copper.

Available in 3″ and 4″ sizes.

For the perfect finishing touch, add a Leader Head Roof (see below).

Inline Downspout Cleanouts

$44.00$75.00

The Downspout Cleanout contains a screen that prevents debris from clogging your drain. (Periodic cleaning of the screen is required.)

Cleanouts are available in 3″, 4″ & 5″ smooth round copper and 4″ zinc.

 

Out Of Stock

Leader Head Roofs

The perfect way to top off your Leader Head(s).

Fits Spherical, European, Scupper, Harwell, Cisco and Wexford styles. (Photo shows installation on our Spherical Leader Head.)

Roofs will be manufactured to fit specific Leader Head models, so overall dimensions will vary.

Sold in 2 pieces, available in copper or chromated aluminum (ready to paint).

5″, 6″ & 8″ Stamped Half Round Fascia Brackets, Copper, Chromated Aluminum & Galvalume

$3.50$10.95

We recommend spacing our fascia brackets every 32″ on center. Our stamped fascia bracket requires the fascia board to be at least 4½” in height.

The gutter is secured by folding the back tab down and the front tab over the lip of the gutter.

Stamped fascia brackets are not as strong as our cast fascia brackets. If you are in an area that has heavy snow fall, we recommend cast fascia brackets for strength.

Copper available in 5″, 6″ and 8″ sizes.

Chromated aluminum available in 5″ and 6″ sizes only.

Galvalume is available in 5″ and 6″ sizes only.