Elbows

Showing 1 - 4 of 12 products in this Category

4″ x .024 Aluminum Corrugated Round Elbows, Select Colors

The average installation requires two elbows at the top and one at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary. The offset is the measurement of two connected elbows; 40 degree elbows have a 3″–9″ offset and 72 degree elbows have a 9″ offset.

The degree of elbow you use is determined by the overhang of your structure. To determine the overhang, measure the distance between the wall of your building and the back of the outlet. An overhang of 9″ will require 2- 72 degree elbows. If your overhang is greater than 9″ you’ll need to insert a piece of downspout between the elbows.

An overhang of less than 9″ will require (2) 40 degree elbows. This elbow combination also works when making a transition around a ledge or other protrusions.

You’ll need to reduce the size of the opening on the elbows and downspout when using either corrugated or smooth options. (see Product Description below left and our Elbow & Downspout Crimper Tool.)

Note: These Select Color corrugated aluminum elbows, shown here in Grecian Green, are priced the same as our Standard Colors (see Aluminum Color Chart below), but due to the machine setup required to produce them, there is a $100.00 up charge (one up charge per color, per order, covers elbows and downspout in the same color).

To order Corrugated Select Color Elbows, please call us at 269.665.2700.

Out Of Stock

4″ x 16 oz. Lead Coated Copper Smooth Round & Corrugated Elbows

The average installation requires two elbows at the top and one at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary.

  • The offset is the measurement of two connected elbows. 40 degree elbows have a 2″–7″ offset; 72 degree elbows have a 9″ offset.
  • The degree of elbow you use is determined by the overhang of your structure.

 

To determine the overhang, measure the distance between the wall of your building and the back of the outlet. An overhang of 8″ will require 2- 72 degree elbows. If your overhang is greater than 8″ you will need to insert a piece of downspout between the elbows. An overhang of less than 8″ will require 2- 40 degree elbows.

This elbow combination also works when making a transition around a ledge or other protrusions. You will need to reduce the size of the opening on the elbows and downspout when using either corrugated or smooth options.

See Installation Tips under Product Description below and our Elbow & Downspout Crimper Tool.

Note: Smooth elbows will have folds in the bend.

Please call 269.665.2700 for current pricing, lead time and availability.  Lead coated orders will require a notarized waiver before purchasing.

3″ x 16 oz. Lead Coated Copper Smooth Round & Corrugated Elbows

The average installation requires two elbows at the top and one at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary.

  • The offset is the measurement of two connected elbows. 40 degree elbows have a 2″–7″ offset; 72 degree elbows have a 9″ offset.
  • The degree of elbow you use is determined by the overhang of your structure.

To determine the overhang, measure the distance between the wall of your building and the back of the outlet. An overhang of 8″ will require 2- 72 degree elbows. If your overhang is greater than 8″ you will need to insert a piece of downspout between the elbows. An overhang of less than 8″ will require 2- 40 degree elbows.

This elbow combination also works when making a transition around a ledge or other protrusions. You will need to reduce the size of the opening on the elbows and downspout when using either corrugated or smooth options.

See Installation Tips under Product Description below and our Elbow & Downspout Crimper Tool.)

Note: Smooth elbows fold in the bend.

Please call 269.665.2700 for current pricing, lead time and availability.  Lead coated orders will require a notarized waiver before purchasing.

5″ x 16, 18 & 20 oz. Copper Smooth Round & Corrugated Elbows

$27.50$29.50

Smooth elbows will have one end expanded for ease of installation

The average downspout installation requires 2 elbows at the top and 1 at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary.

The offset is the measurement of 2 connected elbows. The 40 degree elbows have an offset from 5″–10″. 72 degreee elbow offset is 11″. For offsets greater than 11″ extra downspout will be needed.

An overhang of less than 5″ will require 2-40 degree elbows. This elbow combination also works when making a transition around a ledge of other protrusion.

You will need to reduce the size of the opening on the elbows and downspout when installing the downspout system. (See Installation Tips below.)

Note: 16 oz. smooth elbows will have folds in the bend; 18 oz. welded seam smooth elbows are completely smooth.

End Cap Crimper

Showing 1 - 1 of 1 products in this Category

End Cap Crimper

$18.00

The end cap crimper can be used to install our 5″, 6″ & 8″ end caps prior to finishing with solder or sealant.

No more products to view in this category

End Caps

Showing 1 - 4 of 9 products in this Category

6″ Galvalume Flat End Caps

$3.00

Six inch end caps are full coverage and non reversible. Please be sure to order the correct number of left and right styles.

End caps are attached by crimping the edges and finishing with sealant.

For a custom, finished touch, add our Decorative End Cap Insert (see below).

6″ Copper Flat End Caps

$5.50

Six inch end caps are full coverage and non reversible. Please be sure to order the correct number of left and right styles.

End caps are attached by crimping the edges and finishing with solder.

For a custom, finished touch, add our Decorative End Cap Insert (see below).