The average installation requires two elbows at the top and one at the bottom. If you are connecting your downspout into a drain tile, the elbow at the bottom is not necessary.
To determine the overhang, measure the distance between the wall of your building and the back of the outlet. An overhang of 8″ will require 2- 72 degree elbows. If your overhang is greater than 8″ you will need to insert a piece of downspout between the elbows. An overhang of less than 8″ will require 2- 40 degree elbows.
This elbow combination also works when making a transition around a ledge or other protrusions. You will need to reduce the size of the opening on the elbows and downspout when using either corrugated or smooth options.
See Installation Tips under Product Description below and our Elbow & Downspout Crimper Tool.
Note: Smooth elbows will have folds in the bend.
Please call 269.665.2700 for current pricing, lead time and availability. Lead coated orders will require a notarized waiver before purchasing.
Installation tips: A downspout & elbow crimper tool will reduce the size of the opening by crimping the edges of the smooth downspout and elbows. A needle nose pliers may be used to reduce the size of the opening when connecting corrugated elbows and downspout. Take hold of the inside corrugation with the pliers and turn so the corrugation becomes tighter.
